Biogas feeding system for an internal combustion engine
DOI:
https://doi.org/10.21754/tecnia.v13i1.482Abstract
A supply system of dual biogas/gasoline is proposed for a low power spark ignition engine. This work shows aspects related to design, manufacturing and tests of the fuel
supply system, including devices to keep the engine speed constant at all loads. For the design of the carburetor-mixing device, has been utilized a mathematical model in
order to optimise its geometry reducing the pressure losses and keeping adequate by a fuel/air ratio. Moreover, this work shows the experimental results carried out at the
Internal Combustion Engines - UNI Institute in a 6 kW one-cylinder stationary engine.
Downloads
References
[1] Lira Cacho, J.G., Oliveros Donohue, A., Figueroa Reynoso, R., "Generación Eléctrica a partir de biogás". Revista TECNIA Universidad Nacional de Ingeniería. Lima 2000.
[2] Trelles Salvador, J. P. Tesis de Competencia Profesional: "Modelamiento y optimización del diseño de un carburador para biogás". Universidad Nacional de Ingeniería, Facultad de Ingeniería Mecánica. Lima 2001.
[3] Constant, M., Naveau, H., Febrero, G.L. y Nyns, E.J., Biogas- end use in the European Community, Commission of the European Communities". 1996.
[4] Mitzlaff, K. Von, "Engines for biogas". GATE. Deutsches Zentrum fur Entwicklungstechnologien. Germany 1988.
[5] PAE, Ministerio de Energía y Minas, "Eficiencia Energética". Lima 1999.
[6] Heywood, J.B., "Internal Combustion Engine Fundamentals". McGraw Hill Inc. USA 1988
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2003 TECNIA
This work is licensed under a Creative Commons Attribution 4.0 International License.
Articles published by TECNIA can be shared under the international Creative Commons license: CC BY 4.0. Permissions beyond this scope can be inquired via email at tecnia@uni.edu.pe.
