Conversion of a standard direct expansion air conditioner to 100% outside air
DOI:
https://doi.org/10.21754/tecnia.v17i2.376Keywords:
standard air conditioner, outside air equipmentAbstract
The present document is about the conversion of air conditioner standard equipment of direct expansion to an equipment 100% exterior air, for the operation emergency room of the National Hospital Guillermo Almenara Irigoyen. The hospital require for the operation rooms and emergency, enviroments totally aseptic (100% exterior air), and be the most economic possible due to attendance center budget limitations. To set up environment, it is available two kinds of equipments: 100% the especial exterior air and the converted standard. The select is based in the economic assessment method VAN. To convert the standard equipment require the selection of parts, modification and addition of some components, availability of employees qualify for the work and the confidence from the customer in engineering capacity for the installation and maintance if there is any. To achieve that aim it is propose a proceed logic and rational for the standard equipment conversion to an equipment 100% exterior air. Includes the start of the system, and the realization of essays for the temperature and relative humidity regulation until achieve the technical specifications require for the service.
Downloads
References
[1] Creus Sole, A., "Instrumentos industriales. su ajuste y calibración", Barcelona, Marcombo, S. A., 1982, pp.1 y 94.
[2] Haines, R. W., "Sistemas de control para calefacción, ventilación y aire acondicionado". trad. Jorge Bagaria Blanxart. Barcelona, Marcombo, S.S., 1974. simbolos en planos, pp. 247 al 255.
[3] Pita, E. G., "Acondicionamiento de aire, principios y sistemas". Segunda edición. trad. por Virgilio González Pozo. México, compañía editorial Continental, S.A. de c.v..1994, pp. 296, 389 y 393.
[4] Stocker, W. F.. "Refrigeración 7 acondicionamiento de aire". trad. por José Seljas Dominguez. México, mcgraw hill, 1970. pp. 53, 54, 244 y 256.
[5] Tarquin, A. J., Blank, L. T.. "Ingenieria económica". México, me graw hill, 1978, pp. 123.
[6} Air-conditioning & Tefrigeration Institute, "Manual de refrigeración y aire acondicionado". 41. segunda edición. trad. por Virgilio González Pozo. México, prentice-hall hispanoamericana, s.a., 1994, pp. 170, 172, 218, 219, 291, 381 y 442.
[7] Grimm, N. R., Rosaler, R. C., "Manual de diseño de calefacción, ventilación y aire acondicionado". 2t. trad. por Claudio Miguel Gómez y Ramón Urcelay Azpitarte. Madrid, me graw hill, 1996, pp. 36-1 al 36-14 y 36-30.
[8] Alco Controls Division Emerson Electric Co., catalog 27a., "Refrigeration and air conditioning flow controls". St. Louis Missouri Usa., 1997, pp. 78, 79, 177, 178, 206, 210, 236 y 237.
[9] Grainger catalog N 391, "Industrial suply. More Stuff". Faster. Lake Forest, II 60045 Usa, ww. Grainger, inc., 2000, pp. 3382.
[10] Metal aire. Cat. Gr. Grilles and Registers, "Model 1s4d. Model v4004. Model rh. Clearwater, fla. Usa. Metal industries, inc., 1994, pp. 40, 44 y 52.
[11] Metal aire.Cat.5-488, "Square & rectangular directional air diffusers". Series 5000 & 5500 fixed. Series 5000 & 5500 adjustable. Series 5500 suply/return. clearwater, fla. usa., metal industries, inc., 1988, sección IV pp. 4, sección I serie 5000 pp. 13 y 15.
[12] Rheem air conditioning division, form Nº. all-144 revl, supersedes form Nº all-144 rev.0., "Commercial high efficiency condensing units. 6.5, 7.5 & 10 nominal ton units rawc-series". Arkansas Usa., Theem air conditioning division, 1992, pp. 2, 3, 11, 20, 3, 8, 10, 16 y 18).
[13] Rheem air conditioning division, form Nº. h11-508 rev.4 supersedes form Nº h11-508 rev.3., "Commercial air handler 7.5 through 20 nominal ton units" [26 trough 70 kw). rhge-075, 100, 150, 200 rhgf-100. Arkansas Usa., rheem air conditioning division, 1997, pp. 2, 4, 10, 22 y 24.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2007 TECNIA
This work is licensed under a Creative Commons Attribution 4.0 International License.