Influence of drying on the insulation power factor of distribution transformer windings

Authors

  • Jorge Carmelo Ramos Carrión Faculty of Electrical and Electronic Engineering, National University of Engineering. Lima, Peru.
  • Carlos Javier García Albornoz Faculty of Electrical and Electronic Engineering, National University of Engineering. Lima, Peru.

DOI:

https://doi.org/10.21754/tecnia.v28i2.349

Keywords:

insulation power factor, insulation of windings, capacitance of windings, vacuum drying

Abstract

The present article exposes the development of the investigation on the analysis and determination of the influence of the process of elimination of the humidity, absorbed by the solid isolation of the windings, in the power factor of the isolation of the distribution transformers. Considering the power factor as a characteristic parameter that allows to determine how dry the insulation is and thus define its quality from the electrical point of view. It was shown that there is a significant influence on the power factor.

Downloads

Download data is not yet available.

References

[1] Prueba de Tangente Delta y Capacidad Ingeniería de Máquinas Eléctricas (IME)http://www.ime.com.co/filedownload/downloadfile/fileid/48/src/@random558829acd336e

[2] IwanusiwOW2010 Insulation Power Factor Testing of Power Transformers Eltel Industries, Bangalorehttp://www.eltelindustries.com/wp-content/uploads/2013/10/ACTS125K-PLUS.pdf

[3] IEEE Std 621995IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus—Part 1: Oil Filled Power Transformers, Regulators, and Reactors Revision of IEEE Std 62-1978

[4] IEEE Std C57.12.1999 IEEE Standard Test Code for Liquid-Inmersed Distribution, Power, and Regulating TransformersRevision of IEEEStd C57.12.90-1993

[5] Procedimiento para secado de transformadores de distribuciónBombas de Vacío y Deshidratación SAhttp://www.bombasdevacio.com.mx/desgas_procedsecadotransformadoresDistrib.html

[6] Van WylenGy SonntangR1975 Fundamentos de Termodinámica (Primera Edición)México: Editorial Limusa pp66-69

[7] Manual Minitab16Meet Minitab 16https://es.scribd.com/doc/58634097/Manual-Minitab-16

[8] MontgomeryD2008Diseño y Análisis de Experimentos (Segunda Edición)México: Limusa Wiley pp170-200

Downloads

Published

2018-12-17

How to Cite

[1]
J. C. Ramos Carrión and C. J. García Albornoz, “Influence of drying on the insulation power factor of distribution transformer windings”, TECNIA, vol. 28, no. 2, Dec. 2018.

Issue

Vol. 28 No. 2 (2018)

Section

Renewable energy, electrical engineering and / or power systems

License

Copyright (c) 2018 TECNIA

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Articles published by TECNIA can be shared under the international Creative Commons license: CC BY 4.0. Permissions beyond this scope can be inquired via email at tecnia@uni.edu.pe.