Preparación de nanopartículas de magnetita por el método sol-gel y precipitación estudio de la composición química y estructural

Autores/as

  • Gino Picasso Facultad de Ciencias, Universidad Nacional de Ingeniería
  • Jaime Vega Facultad de Ciencias, Universidad Nacional de Ingeniería, Lima, Perú
  • Rosario Uzuriaga Facultad de Ciencias, Universidad Nacional de Ingeniería, Lima, Perú
  • Gean Pieer Ruiz Facultad de Ciencias, Universidad Nacional de Ingeniería, Lima, Perú

Palabras clave:

Nanopartículas de magnetita, Sol-gel, Precipitación

Resumen

En este trabajo se han preparado muestras nanoparticuladas basadas en magnetita por el método sol-gel y precipitación. En el primer caso se han aplicado 2 variantes: por crecimiento del sol a partir de precursor nitrato y etilenglicol como disolvente y agente reductor y por hidrólisis forzada y control esférico a partir de precursor sulfato y citrato de sodio. En el segundo caso se ha empleado como precursor sulfato de hierro, hidróxido de amonio como agente precipitante y etilenglicol como surfactante. Las muestras se han caracterizado mediante las técnicas de difracción de rayos X (XRD), adsorción-desorción de N2 (m´etodo BET) y espectroscopia Mossbauer. Los resultados de los difractogramas XRD indicaron la formación mayoritaria de la especie magnetita que se evidenció por la presencia de los picos característicos de las siguientes posiciones: 30.06o, 35.42o; 62.55o. El valor del área superficial promedio medida por la t´ecnica BET de las muestras de magnetita fue entre 40 a 50 m2/g con una isoterma tipo IV correspondiente a una superficie mesoporosa. El espectro Mo¨ssbauer de la muestra de magnetita obtenido por solgel y realizado a temperatura ambiente detecto´ la presencia de 2 sextetos conformados por 2 sitios: uno octa´edrico (Fe2+, Fe3+) y otro tetra´edrico ( Fe3+). El taman˜o de grano de las muestras de magnetita se estimó partir del taman˜o de la cristalita según la ecuación de Scherrer y de la superficie específica , obteniéndose un díametro medio en el rango de 2 a 20 nm.

Descargas

Los datos de descargas todavía no están disponibles.

Citas

1. Yang X., Chen L., Han B., Yang X., Duan H., Preparation of magnetite and tumor dual-targeting hollow polymer microspheres with pH-sensitivity for anticancer drugcarriers, Polymer 51, 2533-2539 (2010).
2. Yazdania F., Edrissi M., Effect of pressure on the size of magnetite nanoparticles in the coprecipitation synthesis, Materials Science and Engineering B 171, 86-89 (2010).
3. Murbe J., Rechtenbach A., Synthesis and physical characterization of magnetite nanoparticles for biomedical applications, Materials Chemistry and Physics 110, 426?433(2008).
4. Li Z., Kawashita M., Araki N., Mitsumori M., Hiraoka M., Doi M., Magnetite nanoparticles with high heating efficiencies for application in thehyperthermia of cancer, Materials Science and Engineering C 30, 990-996 (2010).
5. Grande Antonio H., Nanotecnología y nanopartículas magnéticas: la física actual en lucha contra la enfermedad, Rev.R.Acad.Cienc.Exact.Fís.Nat.(esp.), vol. 101, No. 2, pp 321-327 (2007).
6. Alexiou C, Diehl D, Henninger P, Iro H, Rockelein R, Schmidt W, Weber H, A high eld gradient magnet for magnetic drug targeting. IEEE Trans. Applied Supercond. 16(2): 1527-1530 (2006).
7. Bedanta S, Kleemann W, Supermagnetism. Journal of physics.D, Applied physics, 42(1). ID: 65. Brigger, I., Dubernet, C., & Couvreur, Nanoparticles in cancer therapy and diagnosis. Adv. Drug Delivery Rev. 54(5): 631 (2009).
8. Fukumori Y, Ichikawa H, Nanoparticles for cancer therapy and diagnosis. Adv. Powder Technology. 17(1): 1 (2006).
9. Oliveira Mariana C. Q., Lanza Marcos R. V, Tanakac Auro A., Taboada Sotomayor P., Flow injection analysis of paracetamol using a biomimetic sensor as a sensitive and selective amperometric detector, Anal. Methods, 2, 507-512 (2010).
10. Moreira Luiz Fernando, de Vasconcelos Lanza M. R., Tanaka A. A., Taboada Sotomayor M.P., Selective UV- lter detection with sensors based on stainless steel electrodes modied with polyaniline doped with metal tetrasulfonated phthalocyanine lms, Analyst 134, 1453-1461 (2009).
11. Jacometo Castilho T., Taboada Sotomayor M.P., Kubota Lauro Tatsuo, Amperometric biosensor based on horseradish peroxidase for biogenic amine determinations in biological samples, Journal of Pharmaceutical and Biomedical Analysis 37, 785?791 (2005).
12. Valero Navarro A., Medina Castillo A., Fernandez- Sanchez J., Fernández-Gutiérrez A., Synthesis of a novel polyurethane-based-magnetic imprinted polymer for the selective optical detection of 1-naphthylamine in drinking water, Biosensors and Bioelectronics, v. 26, Issue 11, p. 4520-4525 (2011).
13. Qiang Yu, Shubo Deng, Gang Yu, Selective removal of per uorooctane sulfonate from aqueous solution using chitosan-based molecularly imprinted polymer adsorbents, Water Research, Volume 42, Issue 12, p. 3089-3097 (2008).
14. Alizadeh T., Akhoundian M., A novel potentiometric sensor for promethazine based on a molecularly imprinted polymer (MIP): The role of MIP structure on the sensor performance, Electrochimica Acta, v. 55, Issue 10, p. 3477-3485 (2010).
15. Abdalla M.A., Jaafar M.H., Al-Othman Z.A., Alfadul S.M., Ali Khan M., New route of preparation and characterization of magnetite nanoparticles, Arabian Journal of Chemistry, v. 4, Issue 2, p. 235-237 (2011).
16. Fajaroh F. , Setyawan H., Widiyastuti W., Winard S., Synthesis of magnetite nanoparticles by surfactant-free electrochemical method in an aqueous system, Advanced Powder Technology, In Press, Corrected Proof, Available online (2011).
17. Galeotti F. Bertini F., Scavia G., Bolognesi A. A controlled approach to iron oxide nanoparticles functionalization for magnetic polymer brushes, Journal of Colloid and Interface Science, v. 360, Issue 2, p. 540-547 (2011).
18. Shen Wu, Aizhi Sun, Fuqiang Zhai, Jin Wang, Wenhuan Xu, Qian Zhang, Alex A. Volinsky, Fe3O4 magnetic nanoparticles synthesis from tailings by ultrasonic chemical co-precipitation, Materials Letters, v. 65, Issue 12, p. 1882-1884 (2011).
19. Jing Xu, Haibin Yang ,Wuyou Fu, Kai Du, Yongming Sui, Jiuju Chen, Yi Zeng, Minghui Li, Guangtian Zou, Preparation and magnetic properties of magnetite nanoparticles by sol-gel method, J. Magnetism and Magnetic Materials 309, p. 307?311 (2007),
20. Itoh Hiroyuki, Sugimoto Tadao, Systematic control of size, shape, structure, and magnetic properties of uniform magnetite and maghemite particles, J. Colloid and Interface Science 265, 283-295 (2003).
21. Da Costa G.M., De Grave E., De Bakker P.M., Vandenberghe R.E., Synthesis and characterization of some iron oxides by saol.gel, J. Solid State Chemistry 113, 405-412 (1994).
22. Vergés M Andrés, Costo R., Roca A.G., Marco J.F., Goya G.F., Serna C.J., Morales P.M., Uniform and water stable magnetite nanoparticles with diameters around the monodomain? multidomain limit, J. Phys. D: Appl. Phys. 41, 134003 (2008).
23. Jiwon Lee, Tetsuhiko Isobe, Mamoru Senna, Magnetic properties of ultrane magnetite particles and their slurries prepared via in-situ precipitation, Colloids and Surfaces A: Physicochemical and Engineering Aspects 109 p. 121-127 (1996).
24. Wang Xuman, Zhang Caining, Wang Xiaoliang, Gu Hongchen, The study on magnetite particles coated with bilayer surfactants, Applied Surface Science 253, p. 7516- 7521 (2007).

Descargas

Publicado

2021-04-09

Cómo citar

Picasso, G., Vega, J., Uzuriaga , R., & Ruiz, G. P. (2021). Preparación de nanopartículas de magnetita por el método sol-gel y precipitación estudio de la composición química y estructural. REVCIUNI, 14(2), 10–16. Recuperado a partir de http://revistas.uni.edu.pe/index.php/revciuni/article/view/918

Número

Sección

Artículos